Mitsubishi ASX 2016 Owner's Manual page 295

5. The voice guide will prompt for phrase
1. Repeat the corresponding phrase lis-
ted in table "Enrollment commands" on
page 7-68.
The system will register your voice and
then move on to the registration of the
next command. Continue the process un-
til all phrases have been registered.
NOTE
l
To repeat the most recent voice training
command, press and release the SPEECH
button.
l If you press the HANG-UP button anytime
during the process, the system will beep and
stop the speaker enrollment process.
6. When all enrollment commands have
been read out, the voice guide will say
"Speaker enrollment is complete".
The system will then end the speaker en-
rollment process and return to the main
menu.
NOTE
l Completing the speaker enrollment process
will turn on the voice model automatically.
l The commands "Help" and "Cancel" will
not work in this mode.
Enabling and disabling the
voice model and retraining
You can turn a voice model registered with
the speaker enrollment function on and off
whenever you want.
You can also retrain the system.
Use the following procedure to perform these
actions.
1. Press the SPEECH button.
2. Say "Voice training".
3. If you have completed a speaker enroll-
ment process once already, the voice
guide will say either "Enrollment is ena-
bled. Would you like to disable or re-
train?" or "Enrollment is disabled.
Would you like to enable or retrain?"
4. When enrollment is "enabled", the voice
model is on; when enrollment is "disa-
bled", the voice model is off. Say the
command that fits your needs.
Say "Retrain" to start the speaker enroll-
ment process and recreate a new voice
model. (Refer to "Speaker enrollment"
on page 7-52.)
OGAE15E5
Bluetooth
Connecting the Bluetooth
interface and Bluetooth
vice
E00727600100
Before you can make or receive hands-free
calls or play music using the Bluetooth
interface function, you must pair the Blue-
®
tooth device and Bluetooth
NOTE
l Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, you only need to bring the device into
the vehicle next time and the device will au-
tomatically connect to the Bluetooth
terface (if supported by the device). The de-
vice must have Bluetooth
connect.
Up to 7 Bluetooth
®
with the Bluetooth
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
terface.
You can also change a Bluetooth
be connected.
For pleasant driving
®
2.0 interface*
®
2.0
®
de-
E00760601634
®
2.0
®
2.0 interface.
7
®
2.0 inter-
®
2.0 in-
®
turned ON to
®
devices can be paired
2.0 interface.
®
devices are
®
2.0 in-
®
device to
7-53