Mitsubishi ASX 2016 Owner's Manual page 132

Indication lamp, warning lamp, and information screen display list
Information screen display list
When there is information to be announced, such as lamp reminders, a sound is emitted and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to "Warning display list (when the ignition switch or the operation mode is OFF)" on page 5-28.
Refer to "Warning display list (when the ignition switch or the operation mode is ON)" on page 5-32.
5
Refer to "Other interrupt displays" on page 5-40.
NOTE
l A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.
• An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a radar station.
• Abnormal voltage or a static electricity discharge is generated by the operation of installed electrical equipment (including after-market parts).
If the warning display appears many times, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
Warning display list (when the ignition switch or the operation mode is OFF)
Screen type 1
5-28 Instruments and controls
Screen type 2
l
You have forgotten to turn off
the lamps.
OGAE15E5
Cause Solution (Reference)
l
Refer to "Lamps (headlamps,
fog lamp, etc.) auto-cutout
function" on page 5-48.
E00523900233
E00524000983