Mitsubishi ASX 2016 Owner's Manual page 184

Table of Contents

Advertisement

Starting
2. Make sure the parking brake is applied.
3. Press and hold the brake pedal down
firmly with your right foot.
4. Fully depress the clutch pedal (M/T).
5. On vehicles equipped with M/T, place
the gearshift lever in the "N" (Neutral)
position.
On vehicles equipped with A/T, make
sure the selector lever is in the "P"
6
(PARK) position.
Vehicles with M/T
Vehicles with A/T
6. Turn the ignition key to the "ON" posi-
tion.
The diesel preheat indication lamp will
first illuminate, and then after a short
time go out, indicating that preheating is
completed.
NOTE
l
If the engine is cold, the diesel preheat indi-
cation lamp is on for a longer time.
6-16
Starting and driving
NOTE
l
When the engine has not been started within
about 5 seconds after the diesel preheat indi-
cation lamp went out, return the ignition key
to the "LOCK" position. Then, turn the key
to the "ON" position to preheat the engine
again.
l
When the engine is warm, the diesel preheat
indication lamp does not come on even if the
ignition key is placed in the "ON" position.
Start the engine by turning the ignition key
right to the "START" position.
7. Turn the ignition key to the "START"
position without depressing the accelera-
tor pedal, and release it when the engine
starts.
NOTE
l
Minor noises may be heard on engine start-
up. These will disappear as the engine
warms up.
OGAE15E5
NOTE
l
For diesel-powered vehicles, if the tempera-
ture inside the engine compartment is high,
the cooling fans (A) will continue to operate
for some time even if the engine is stopped.
Therefore, the operation sound of the cool-
ing fans may be heard even after the engine
is stopped. This sound is normal and does
not indicate a malfunction.
After operating for a period of time, the
cooling fans will stop automatically.
*: Front of the vehicle
Fuel injection amount learning
process (diesel-powered 2200
models)
To keep exhaust emissions and engine noise
low, the engine very occasionally performs a
learning process for the fuel injection
amount.
E00627901079

Advertisement

Table of Contents
loading

Table of Contents