Outside Rear-View Mirrors - Mitsubishi ASX 2016 Owner's Manual

Outside rear-view mirrors

Type 2
When the headlamps of the vehicles behind
you are very bright, the reflection factor of
the rear-view mirror is automatically changed
to reduce the glare.
6
When the ignition switch is turned to the
"ON" position or the operation mode is put in
ON, the reflection factor of the mirror is au-
tomatically changed.
NOTE
l Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
6-10 Starting and driving
Outside rear-view mirrors
To adjust the mirror position
The outside rear-view mirrors can be operat-
ed when the ignition switch or the operation
mode is in ON or ACC.
WARNING
l Do not attempt to adjust the rear-view
mirrors while driving. This can be dan-
gerous.
Always adjust the mirrors before driving.
l Your vehicle is equipped with convex type
mirrors.
Please take into consideration, that ob-
jects you see in the mirror will look small-
er and farther away compared to a nor-
mal flat mirror.
Do not use this mirror to estimate dis-
tance of following vehicles when changing
lanes.
OGAE15E5
1. Place the lever (A) to the same side as
the mirror whose adjustment is desired.
E00600900628
Except for vehicles equipped with the mirror
retractor switch
E00601000642
Vehicles equipped with the mirror retractor switch
L- Left outside mirror adjustment
R- Right outside mirror adjustment
2. Press the switch (B) to the left, right, up
or down to adjust the mirror position.
1- Up
2- Down
3- Right
4- Left
3. Return the lever (A) back to the middle
position (•).