Mitsubishi ASX 2016 Owner's Manual page 223

Cruise control switches
A- CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise control.
B- SET - switch
Used to reduce the set speed and to set the
desired speed.
C- RES + switch
Used to increase the set speed and to return to
the original set speed.
D- CANCEL switch
Used to deactivate the set speed driving.
NOTE
l When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
1. With the ignition switch is in "ON" posi-
tion or the operation mode is in ON,
press the CRUISE CONTROL ON/OFF
switch (A) to turn on the cruise control.
The "CRUISE" indication lamp in the
meter cluster will come on.
OGAE15E5
NOTE
l If the cruise control is on when the following
operation is performed, cruise control will
be on automatically the next time you start
the engine. The "CRUISE" indication lamp
will also be on.
[Except vehicles equipped with keyless op-
eration system]
Turn the ignition switch to the "LOCK" or
"ACC" position.
E00609301198
[Vehicles equipped with keyless operation
system]
Put the operation mode in OFF or ACC.
l
If the battery voltage is insufficient, the
memory data for the cruise control may be
erased.
As a result, the "CRUISE" indication lamp
may not come on when you restart the en-
gine.
If this happens, press the CRUISE CON-
TROL ON/OFF switch once again to turn on
the cruise control.
Starting and driving
Cruise control*
6
6-55