Mitsubishi ASX 2016 Owner's Manual page 294

®
Bluetooth 2.0 interface*
If the entered password is wrong, the voice
guide will say "<4- digit password>, Incor-
rect password. Please try again". Enter the
correct password.
NOTE
l You can re-enter the password as many
times as you want.
l If you have forgotten your password, say
"Cancel" to quit the voice input mode and
then check with a MITSUBISHI MOTORS
7
Authorized Service Point.
Disabling the password
Use the following procedure to turn off the
security function by disabling the password.
NOTE
l System must be unlocked to disable the
password.
1. Press the SPEECH button.
2. Say "Setup".
3. Say "Password."
4. The voice guide will say "Password is
enabled. Would you like to disable it?"
Answer "Yes."
Answer "No" to cancel the disabling of
the password and return to the main
menu.
7-52 For pleasant driving
5. When the disabling of the password is
completed, the voice guide will say
"Password is disabled" and the system
will return to the main menu.
Speaker enrollment function
®
The Bluetooth 2.0 interface can use the
speaker enrollment function to create a voice
model for one person per language.
This makes it easier for the Bluetooth
interface to recognise voice commands said
by you.
You can turn a voice model registered with
the speaker enrollment function on and off
whenever you want.
Speaker enrollment
It takes about 2 to 3 minutes to complete the
speaker enrollment process.
To ensure the best results, run through the
process while in the driver's seat, in an envi-
ronment that is as quiet as possible (when
there is no rain or strong winds and the vehi-
cle windows are closed). Please turn off your
phone while in speaker enrollment to prevent
interruption of the process.
Use the following procedure for speaker en-
rollment.
1. Stop your vehicle in a safe area, put the
gearshift lever in the "N" (Neutral) posi-
tion (M/T), or the selector lever in the
OGAE15E5
"P" (PARK) position (A/T or CVT), and
pull the parking brake lever.
NOTE
l Speaker enrollment is not possible unless the
vehicle is parked. Make sure you park the
vehicle in a safe area before attempting
E00727400238
speaker enrollment.
2. Press the SPEECH button.
®
2.0
3. Say "Voice training".
4. The voice guide will say "This operation
must be performed in a quiet environ-
ment while the vehicle is stopped. See
the owner's manual for the list of re-
quired training phrases. Press and re-
lease the SPEECH button when you are
ready to begin. Press the HANG-UP but-
E00727500301
ton to cancel at any time".
Press the SPEECH button to start the
speaker enrollment process.
NOTE
l If you do not start the speaker enrollment
process within 3 minutes of pressing the
SPEECH button, the speaker enrollment
function will time out.
The voice guide will say "Speaker Enroll-
ment has timed out". The system will then
beep and the voice recognition mode will be
deactivated.