Mitsubishi ASX 2016 Owner's Manual page 237

Location of rear-view camera
The rear-view camera (A) is integrated into
the part near the tailgate handle.
Range of view of rear-view
camera
How to use the rear-view cam-
era
When you place the gearshift lever or selec-
tor lever in the "R" position with the ignition
switch or the operation mode in ON, the view
behind the vehicle will automatically appear
on the screen of the MITSUBISHI Multi
Communication System (MMCS) or the DIS-
PLAY AUDIO. When you move the gear-
shift lever or the selector lever to any other
position, the screen will return to its original
indication.
CAUTION
l The rear-view camera has a special lens that
can make objects shown on the screen ap-
pear to be closer or further away than they
actually are.
OGAE15E5
Rear-view camera*
NOTE
l Because the rear-view camera has a special
lens, the lines on the ground between park-
ing spaces may not look parallel on the
screen.
l In the following situations, the screen indi-
cation may be difficult to see. There is no
abnormality.
• Low light (nighttime).
• When the light of the sun or the light from
a vehicle's headlamps shines directly into
the lens.
l If the camera is hot and is then cooled by
rain or a car wash, the lens can mist up. This
phenomenon does not indicate a malfunc-
tion.
l It is not possible to fully see obstacles when
the lens is dirty. If the lens becomes conta-
minated by water droplets, snow, mud or oil,
wipe off the contamination, taking care not
to scratch the lens.
l Please observe the following cautions. Ig-
noring them could lead to a camera malfunc-
tion.
• Do not subject the camera to physical
shock.
• Do not apply wax to the camera.
• Do not splash the camera with boiling wa-
ter.
• Do not disassemble the camera.
Reference lines on the screen
Reference lines and upper surface of the rear
bumper (A) are displayed on the screen.
Starting and driving
6
6-69