Scan Setting; Audio Settings; Storing Fm Stations On A Favourites Memory Slot; Retrieving Stations From A Favourites Memory Slot - TechniSat DIGITRADIO 20 CD Manual

8.5 Scan setting

In the [FM menu] submenu it is possible to set the scan sensitivity.
> Briefly press the MENU button and use the SCROLL&SELECT knob in
the [FM menu] submenu to select the [Scan settings] item. Press the
SCROLL&SELECT knob to make your selection.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak
signal) [All Stations].
With the All Stations setting the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.

8.6 Audio settings

> Briefly press the MENU button and use the SCROLL&SELECT knob in
the [FM menu] submenu to select the [Audio setting] item. Press the
SCROLL&SELECT knob to make your selection.
> Using the SCROLL&SELECT knob, select the [Stereo available] item or [Mono
only] to play back in stereo or only in mono sound when the FM reception is
weak.
> Confirm the selection by pressing the SCROLL&SELECT knob.

8.7 Storing FM stations on a favourites memory slot

In FM mode there are 6 favourites memory slots available for direct selection.
> Now select the desired station.
> To store this station on a favourites memory slot, hold down one of the
favourites memory slot buttons 1 - 6 while playing until [Favourite saved]
appears on the display.
> Repeat this process to save other stations.

8.8 Retrieving stations from a favourites memory slot

> To retrieve a station that you have already stored on a favourites memory slot,
briefly press the corresponding favourites memory slot button 1 - 6.
If no station is saved on the selected station slot,[empty] appears on the
display.
24