Warranty - LifeSpan BOLT M2 Owner's Manual

If the motor doesn't rotate after pressing "START" button. The wire that controls the motor
might be the issue.
If the protective tube on control board is damaged or fallen off: Check if the protective tube is
OK, re-set it or change one.
If the motor wire isn't connected well: Check if the motor wire is connected well and re-
connect it.
If the IGBT on control board is burnt out: Use multimeter to test if the IGBT is burnt out and
change an IGBT or control board.
E07/E08 EEPROM damaged
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
Warranty and Support:
Please email us at support@lifespanfitness.com.au
For all warranty or support related enquiries an email must be sent before contacting us via any other means.
Change a control board

11. WARRANTY

for all warranty or support issues.
26