LifeSpan BOLT M2 Owner's Manual page 9

STEP 3:
STEP 5:
STEP 4:
1. Position the display according to the
illustration.
Note: When you are unfolding ensure that
any wires are tucked inside and do not get
pressed on by the frame.
You will need assistance with holding the
frame upright.
1. Use 5# Allen wrench (10) to secure right
upright onto base frame with bolt (70),
bolt (62) and 2x lock washer (42).
2. Repeat the same steps for the left
uprights, as shown in image.
Warning: You may need another person to
support the uprights as you install the bolt, to
avoid it from collapsing.
9