Important Electrical Information; Important Operating Instructions - LifeSpan BOLT M2 Owner's Manual

2. IMPORTANT ELECTRICAL INFORMATION

WARNING!
Route the power cord away from any moving part of the treadmill including the elevation mechanism
•
and transport wheels.
NEVER remove any cover without first disconnecting AC power.
•
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
•
near a pool, or in any other high humidity environment.
This is a high-power item; please do not share the same outlet with other high-power machines
•
such as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make
sure the fuse is 10A.

3. IMPORTANT OPERATING INSTRUCTIONS

Understand that changes in speed and incline do not occur immediately. Set your desired speed on
•
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
•
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
This unit starts with at a very low speed. It is recommended to stand on the side rails and only step
•
on the treadmill as it is moving on a slow speed. This will prolong the life of your motor and run the
belt smoothly.
• In order to prevent losing balance and suffering unexpected injury, never mount or dismount the
treadmill while the belt is moving at high speeds.
• Always hold on to handrail while making control changes.
• A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
5