Ethernet Connector (Lan); Usb 3.0 Connector - Advantech EPC-S201 User Manual

2.4.3

Ethernet Connector (LAN)

EPC-S201 is equipped with two Ethernet controllers that are fully compliant with
IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. LAN1, LAN2 are all equipped
with i210 Ethernet controller. The Ethernet port provides a standard RJ-45 jack con-
nector with LED indicators on the front side to show its Active/Link status (Green
LED) and Speed status (Yellow LED).
Table 2.2: Ethernet Connector (LAN) Pin Definition
Pin
1
2
3
4
5
6
7
8
H3
H4
2.4.4

USB 3.0 Connector

EPC-S201 supports four USB3.0 interfaces, which provide complete Plug & Play and
hot swapping for up to 127 external devices. The USB interface complies with USB
UHCI, Rev. 3.0.
Please refer to Table. 2.3 for its pin assignments. USB 3.0 connectors contain legacy
pins to interface to USB 2.0 devices, and a new set of pins for USB 3.0 connectivity
(both sets reside in the same connector).
Table 2.3: USB Connector Pin Definition
Pin
1
2
3
Figure 2.6 Ethernet Connector (LAN)
10/100/1000 Mbps Signal Name
BI_DA+(GHz)
BI_DA-(GHz)
BI_DB+(GHz)
BI_DC+(GHz)
BI_DC-(GHz)
BI_DB-(GHz)
BI_DD+(GHz)
BI_DD-(GHz)
GND
GND
Figure 2.7 USB Connector
Signal Name
+5V
D-_0
D+_0
11 EPC-S201 User Manual