Figure 3.13 Uncore Configuration - Advantech EPC-S201 User Manual

 Serial IRQ Mode
Configure Serial IRQ Mode.
 SMBus Support
Enable/Disable SMBus Support.
 OS Selection
Select the target OS.
3.2.3.3 Uncore Configuration
 Integrated Graphics Device
Enable: Enable Integrated Graphics Device (IGD) when selected as the Primary
Video Adaptor. Disable: Always disable IGD.
 Primary Display
Select which of IGD/PCI Graphics device should be Primary Display.
 RC6(Render Standby)
Check to enable render standby support.
 GTT Size
Select the GTT Size.
 Aperture Size
Select the Aperture Size.
 DVMT Pre-Allocated
Select DVMT 4.0 Pre-Allocated (UMA) Graphics Memory size used by the Inter-
nal Graphics Device.
 DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device.
 GT PM Support
EPC-S201 User Manual

Figure 3.13 Uncore Configuration

34