Dakota Digital VHX-55J Installation Manual

Vhx instrument for 1955-‘86 jeep

Table of Contents

Download this manual

Your new VHX-55J kit includes:

Universal Sender

Switch Assembly

1. Remove the stock gauges from the dash. The only factory hardware to be re-used will be the four

palnuts securing the main gauge to the dash.

2. Using the four palnuts kept from Step 1, secure the Dakota Digital main display to the back of the

dash.

Dakota Digital VHX Instrument Installation

Installation Manuals

Pack

CAT5 Cable

VHX-55J

For 1955-'86 Jeep

VHX Display

(4x) 4-40 Lock Washers

(4x) 4-40 Thumb Nuts

(2x) Aluminum Brackets

Control Box

Manual # 650400B

Table of Contents

Do you have a question about the VHX-55J and is the answer not in the manual?

Page 1 1. Remove the stock gauges from the dash. The only factory hardware to be re-used will be the four palnuts securing the main gauge to the dash. 2. Using the four palnuts kept from Step 1, secure the Dakota Digital main display to the back of the dash.
Page 2 3. Slide the temperature gauge through the opening from the front. Using the provided lock washers, thumb nuts, and bracket, secure the gauge. Pay attention to the orientation of the gauge to keep the gauge at the proper reading level. Repeat this step for the oil pressure gauge. 4.
Page 3 5. Connect the CAT5 cable to the system. As the assembled cluster is installed into the dash, take care when routing this cable to the control box. 6. Refer to the main manual to complete the rest of the VHX wiring installation. Manual # 650400B...
Page 4 WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Manual # 650400B...