Unit - Schiller AT-101 User Manual

AT-101
TEST

UNIT

COMM
AND INFO
Parameter
User Identification (User ID)
Date
Time
Language
Start-up Screen
Paper
User Guide
5.3.1 Unit
Press softkey UNIT
EXIT
Options Description
Enter user ID The user identification is printed on all recordings. The user ID can be the
department, doctor or hospital etc. Select User ID and a blinking cursor is
present - enter up to 30 characters via the keypad.
Note
If the unit is reset to the default settings (see following), the user identifi-
cation must be re-entered.
Enter the date in the format day.month.year. When set, the ENTER key
dd-mm-yy
must be pressed to confirm.
Enter the time using the standard 24 hr notation. When set, the ENTER
hrhr/minmin
key must be pressed to confirm.
Several languages are already programmed into the unit. Select the lan-
Deutsch
guage for the screen display and for the printout. The language will also
English (Default)
set the units used by the system.
Francais
The difference between American and English is as follows:
Svensk
American
American
Italiano
measurements in inches
Espanol
temperature in Fahrenheit
Portuges
Mains filter setting - 60Hz
date order mm-dd-yy
Dutch
Patient Data Here you can specify the first screen to be displayed when the unit is swit-
ched on. Select between patient data screen (for entry of new patient) or
Resting ECG
data acquisition screen (ECG).
The external printer can print on A4 or letter size paper. Set according to
A4
the paper used.
Letter
Setup
System Settings
Standard English
measurements in centimetres
temperature in degrees centigrade.
mains filter setting - 50Hz
date order dd-mm-yy
5
5.3
Page 41