Location And Description Of Displays And Controls; Front Of Maglife Light; Rear Of Maglife Light; Mains Power Unit - Schiller MAGLIFE LIGHT User Manual

MAGLIFE light

2. Location and description of displays and controls

2.1 Front of MAGLIFE light

(see photo in section 11 )
1. Main device on/off key.
2. Device "ON" indicator.
3. "MAINS" connection indicator.
4. "BATTERY" Indicator, showing that the battery is being charged (flashing), or is fully charged
(steady).
5. Main "MENU" key. Access to the main menu and for exiting a menu from any other place.
6. Navigation button for menu selection.
7. Display for curves, parameters, menus and messages.
8. "NIBP" key, for starting up or stopping a measurement or a series of measurements of the
blood pressure via a cuff.
9. "Alarm silence" key, enables or disables the two-minute or permanent audio alarm function
(physiological and technical alarms).
10. Device "STANDBY" key.
11. SPO optical oximeter sensor connector.
2
12. NIBP cuff connector.

2.2 Rear of MAGLIFE light

(see photo in section 12 )
13. Connector for the low voltage cord for connecting to the mains power unit.
14. Loudspeaker
15. USB connector
16. RS 232 connector
17. Auxiliary connector compartment cover.
18. Identification label.

2.3 Mains power unit

(see photo in section 12 )
19. Mains plug.
20. Low voltage plug for connecting the MAGLIFE light.
Part number: 0-48-0080 Page 9