Installing Vmware Esxi - NEC Express5800/R320g-E4 Installation Manual

Chapter 1 Installing Operating System
1.7

Installing VMware ESXi

Installing VMware ESXi
1. Press the POWER switch on the front side of the server to start the system from CPU/IO module 0 and
then perform the following procedures.
2. Immediately after powering on the server, insert the VMware ESXi Install DVD into the DVD drive of the
server.
3. When an installation confirmation message appears, press Enter.
4. When the End User License Agreement (EULA) screen for VMware ESXi appears, press F11.
32
Important Make sure that the PRIMARY LED on CPU/IO module 0 is lit.
Note Make sure that Module POWER LEDs on both CPU/IO modules 0 and 1 are blinking, then
press the POWER switch.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure