Enabling Fibre Channel Card - NEC Express5800/R320g-E4 Installation Manual

Chapter 1 Installing Operating System
1.4

Enabling Fibre Channel card

The following procedure shows when installing or reinstalling VMware ESXi to the external storage.
1. Turn on the display and the peripheral equipment connected to the server.
2. Remove the front bezel.
3. Press the POWER switch that is located on the front side of the server.
Lift the acrylic cover, and press the POWER switch
Important
After a while, the logo will appear on the screen.
If the power cords are connected to a power controller like a UPS, make sure that it is
Note
powered on.
Do not turn off the power before the logo
appears.
While the logo is displayed on the screen, the server performs a power-on self test (POST)
Tips
to check itself. For details, refer to Chapter 3 (1.1 POST) in User's Guide.
If the server detects errors during POST, it will interrupt POST and display the error
Note
message. Refer to Chapter 1 (6.2 POST Error Message) in Maintenance Guide.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
.
Acrylic cover
POWER switch
1. Setup Procedure
19