NEC Express5800/R320g-E4 Installation Manual page 69

Chapter 1 Installing Operating System
4. If successful, [PASS] appears in the output.
Output example:
ftSys Management Appliance hosted by xxx.xxx.xxx.xxx
Host is configured with enough memory
ftSys installed on host
Host software version matches expected version (x.x.x-xxx)
ftSys Management Appliance firewall settings
Host Firmware Boot Type - requires UEFI
Host Legacy memory copy BIOS setting
ftSys Management Appliance installed on boot volume
Multiple paths to storage
Network Configuration
Host ftSys service started
Host logs available after reboot
DNS Configuration
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
2. Procedures after Completion of Installation
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
[PASS]
69