NEC Express5800/R320g-E4 Installation Manual page 28

Chapter 1 Installing Operating System
Select "(Primary) Boot Port Name, Lun:", and then press Enter.
2-8
The storage devices that are recognized by the Fibre Channel card are displayed in the "Select
2-9
Fibre Channel Device" window. Select the storage device to boot, and then press Enter.
In the "Select LUN" window, select LUN to boot, and then press Enter.
2-10
28
Note This window is not displayed if there is only one LUN.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure