Chapter 1 Installing Operating System
6.
Move the cursor onto "PCI Device Controller and Option ROM Settings", and press Enter.
7.
Move the cursor onto "SAS Option ROM Scan" and press Enter.
Parameters will be displayed. Select "Enabled" and press Enter.
Among the parameters, choose "Enabled" and press Enter.
The current display of the configuration for SAS Option ROM Scan will be changed to "Enabled".
8.
Select an item other than SAS Option ROM Scan, and press Enter. Select Disabled from the
parameters displayed, and press Enter. Repeat these steps for all items other than SAS Option ROM
Scan.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure
17