NEC Express5800/R320g-E4 Installation Manual page 24

Chapter 1 Installing Operating System
3. Move the cursor onto Save & Exit, the Save & Exit menu appears.
4. Select Save Changes and Power Off.
On the confirmation window shown below, select Yes to save parameters and exit SETUP.
System turns off when SETUP completes.
Now OS Boot Monitoring function is disabled.
24
To continue with the setup procedure, proceed to "1.6 Setting HBA configuration by using
Tips
QLogic" on the next page if the Fibre Channel card is enabled, and to "1.7 Installing VMware
ESXi" if the internal hard disk drive is enabled.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure