Automatic Redial - Comdial Impact 8012S Series User Manual

Other Advanced Features

Automatic Redial

If your station has the multiple automatic redial feature enabled, you can place up to
10 numbers in your telephone's redial queue.
NOTE: The AUTOMATIC REDIAL button described in the following steps
must be programmed by your system installer or attendant. Individual users
DO NOT have access to programming of this feature.
•
To use the automatic redial feature to redial a busy or
unanswered number,
1. While on the call, SELECT ARDL OR PRESS
the AUTOMATIC REDIAL button programmed
by your installer.
2. The system repeatedly dials the number until you
cancel the feature or the system has dialed the
number a preprogrammed number of times
(determined by your system installer).
3. The AUTOMATIC REDIAL light flashes
between redials and turns on steady during
redialing.
4. IF your installer has enabled answer supervision on your line, the
system automatically cancels automatic redialing and turns the
AUTOMATIC REDIAL light off.
5. IF answer supervision is NOT enabled, SELECT ARDL OR the
programmed AUTOMATIC REDIAL button while on the call to
cancel automatic redialing,
6. IF your system installer has enabled the redial multiple numbers
feature, you can have up to 10 numbers in your redial queue. To add
numbers to your redial queue, REPEAT step 1 in the above
procedure.
64
L123
Initiating Autoredial
LCD Speakerphone Station User's Guide
GCA70-258
CONF ARDL