Programming Automatic Redial; Programming Secure Off-Hook Voice Announce - Comdial ExecuTech System 2000 User Manual

Programming Automatic Redial Key. . .
The system will allow the last previously dialed number to be
automatically and repeatedly redialed for approximately ten
minutes. A softkey must be programmed to provide this feature.
To program a softkey for use as an automatic redial key,
l
Press tTCM .
0
l
Press desired softkey.
l
Press # .
0
l
Press SPKR .
0
NOTE: Label button as Auto Redial key.
Programming Secure Off-Hook
Voice Announce Key, . .
The system will allow a station user to make a non-verbal response
to a secure off-hook voice announcement. This response will
provide a pre-programmed message for display at the calling
station if it is an LCD speakerphone.
To assign softkey for non-verbal one-key response,
l
Dial a a (17>.
l
Press softkey of choice.
.
Dial m.
* Dial a message location number (0
through 9).
NOTE: This is a pre-programmed message made available for
use by attendant programming.
.
Press @ to end.
30