Table of Contents
Advertisement
Connecting Lifesize Icon Flex as a Voice-only or IP-PBX Device
To connect Lifesize Icon Flex to the optional Lifesize Phone for voice-only or IP-PBX conferencing, follow
these steps:
Connect the USB B end of the cable to the back of your Lifesize Icon Flex
1.
your desktop or laptop USB port.
2.
Remove the cable retention support from the back of your Lifesize Icon Flex by loosening the
connecting screw.
3.
Thread the Lifesize Link cable through the cable retention support clip and slide the connecting end
securely into the bracket.
4.
With the cable retention support bracket attached, insert the Lifesize Link cable into the
back of Lifesize Icon Flex. Tighten the connecting screw securely to the device, but do not over tighten.
Lifesize Icon Flex Guide
and the USB A end to
port on the
10
Advertisement
Table of Contents
