Operation Receptal; Holder For Receptal Secretion Canister; Assembling The Receptal; Secretion Canister Set - Atmos A 161 Battery Series Operating Instructions Manual

6.0

Operation Receptal

Fig. 11.
Receptal
Receptal
Fig 12.
15
Fig. 13.
!
10
bag
®
canister
®
16 17
●
Sterile packed parts may no longer be used if
their packing was damaged during transport or
storage

Danger of infection for the patient.
®
6.1 Holder for Receptal
canister
Plug the screw thread of the holder from the top into the
borehole at the bottom side of the device.
Screw it together with the provided screw nut.
6.2

Assembling the Receptal

secretion canister system
Insert the Receptal
i
Insert the vacuum hose.
!
Only bags with integrated bacterial fi lter may be used!
6.3

Connect hose

15 Vacuum channel
16 Vacuum hose
Connection for vacuum hose
17
The secretion is sucked off through the vacuum
channel.
secretion
®
bag into the Receptal
®
Close the canister tightly at all sides.
Check again for density, otherwise no vacuum can
be built up.
● Only use secretion bags with integrated
bacterial fi lter!
A bacterial fi lter avoids divulgement of
bacterias.
®
canister.
®