Selecting Single Or Continuous Measurement - Konica Minolta CHROMA METER CS-200 Instruction Manual

Selecting Single or Continuous Measurement

Here, measurement mode is selectable between "Single measurement" and "Continuous
measurement". Former means one measurement for one press and the latter continuous
measurement from one press to another press of any key. In case of "Continuous mea-
surement", you can also view max and min values during continuous measurement when
measurement is completed.
∗ Setting at the shipment from factory : SINGLE
Operation Procedure
2
1.
Press ESC key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
MENU
Press key.
Menu 1/4 screen appears on LCD screen.
3 1, 7
42
6
< >
CH00: DEFAULT
Lv 0.45
cd/m
x 0.3855
y 0.4447
< >
MODE SINGLE
[ ] = [ 2° ]
<
MENU
CH SETTING
MEAS MODE
SYNC MODE
DELETE
BREAK : [ESC]
[ ] = [ 2° ]
4, 5
< >
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC NO SYNC
< >
2
LENS STANDARD
< >
MEM AUTO NUM
< >
MEMORY DATA
M003:
Lv 0.54
x 0.4004
y 0.4123
>
1/4
SINGLE