Opening And Closing Of Finder Shutter - Konica Minolta CHROMA METER CS-200 Instruction Manual

Opening and Closing of Finder Shutter

To prevent light from finder from badly influencing measurement, internal shutter of finder
is to close for every measurement. If observation through finder during measurement is
required, setting can be changed not to close finder shutter. In this case, light from finder
needs to be avoided by looking into finder during measurement.
∗ Setting at the shipment from factory :
Operation Procedure
2
1.
Press ESC key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
(automatically closes for every measurement)
1 3
] appears on left
46
< > < >
ANGL 1° VIEW
CH00: DEFAULT
< >
SPD AUTO
< >
Lv 92.74
SYNC NO SYNC
< >
cd/m 2
LENS STANDARD
x 0.4185
< >
MEM AUTO NUM
<
y 0.4242
MEMORY DATA
M003:
Lv
x 0.3772
< >
MODE CONT.
y 0.3663
[SFT ] = [ 2° ]
>
1.04