Epson TM-290-II Operator's Manual page 27

N o t e s
• If the cut sheet eject length has not been set by ESCC,
the paper is completely ejected. When the eject length has
been set, the set length is ejected. However, if paper-out
is detected during ejecting, the printer finishes ejecting the
set length even if the
completely.
• The eject direction of
Reference
ESC F, ESCC
<Page Mode>
1 D escription] Prints all the print data
Standard Mode. All the print data will be deleted after printing,
but the paper is not ejected.
Reference
ESC L
CAN
Name
Cancel print data in Page Mode
Format
< 18 >
Description
Deletes all the print data in the current printable area in
Page Mode.
N o t e s
• Deletes the data in the printable area which had been set
before when those data are also present in current printable
area.
• Valid only in Page Mode.
ESC W
Reference
n
ESC SP
Name Set character right-side spacing
< 1B >
Format
Range
Description
Sets the character right-side spacing.
Notes
• The character right-side spacing for double-width mode
• n is set in half-dot units.
• May be shifted by one half-dot from the set value in
H
< 20 > < n >
H H
is twice the set value.
- 2 2 -
set length has not been ejected
the cut sheet is set by ESC F.
and switches from Page Mode to