Commands - Epson TM-290-II Operator's Manual

6-3 Commands

HT
N a m e
Horizontal tab
Format
< 09 >
Description
Moves the print
• This command
Notes
• Horizontal
• The default horizontal tab positions are at intervals of 8
characters (9th column, 17th, 25th. . .) for the primary font.
• Since a half-dots cannot be used in Page Mode, a half-
Reference
ESC D
LF
Name
Print and line feed
< 0A >
Format
Description
Prints the data in the print buffer and performs 1 line feed
based on the current line spacing.
• Sets the print starting position to the beginning of the
Reference
ESC 2, ESC 3
FF
Name
Print and eject cut sheet, or print and switch from Page
Mode to Standard Mode
< 0C >
Format
The following points differ in Standard Mode and Page Mode.
<Standard Mode>
Description
Prints the data in the print buffer and ejects a cut sheet.
H
position to the next horizontal tab position.
is ignored unless the next horizontal tab
position has been set.
tab
positions are set by ESC D.
dot shift may occur from the specified horizontal tab positions.
H
line.
H
- 2 1 -