Epson TM-290-II Operator's Manual page 29

Description
Sets or cancels the user-defined character set.
• Only the lowest bit of n is valid.
When n = < * * * * * * *1 >B, the user-defined character
When n = <* * * * * * *0>B, the user-defined character
D e f a u l t
n = 0
ESC &
Reference
& s n m [a[p]sXa]m-n+1
ESC
N a m e
Define user-defined characters
Format
< 1 B >
< p2 >...< psXa >] m-n+1
R a n g e s = 1
32
0
0
0
Description Defines user-defined characters for ANK character codes.
• "s" specifies the number of bytes in the vertical direction-
• "n" specifies the beginning ASCII code for the definition
• The allowable character code range is from ASCII code
• "a" specifies the number of dots in the horizontal direction.
• "p" is the dot data for the characters. The dot pattern is
• After user-defined characters are defined once, they are
set is set.
set is canceled (and the internal character set is set).
< s >< n >
< 2 6 >
H H
n m
1 2 6
a
6 (5X7
a 10
(7X7
p1...psXa
2 5 5
and "m" the final code. If only one character is defined,
use n = m.
< 20 > to < 7E >
H
characters is 95.
in the horizontal direction from the left side. The remaining
dot pattern on the right side is space.
available until another definition is made, until
executed, until the printer is reset, or until the power is
turned off.
< m >
H
font)
font)
and the maximum number of
H
- 2 4 -
[ < a > < p 1 >
H
ESC @
is