Epson TM-290-II Operator's Manual page 34

as if they were set in Standard Mode.
May be shifted by one half-dot from the set value in Page Mode.
Default •
The default tab positions are at intervals of 8 characters
(9th, 17th, 25th,...) for the 5X7 font.
Reference
HT, 6-4 2. Restrictions in Page Mode
n
ESC F
Name
Set/Cancel cut sheet reverse eject
F o r m a t
< 1 B >
Range
Description Sets or cancels the cut sheet reverse eject when the sheet
ejection is executed using
• Only the lowest bit of n is valid.
n
Default
Reference
FF
n
ESC J
Name
Print and feed paper using minimum units
F o r m a t < 1 B >
R a n g e
Description
Prints the data in the print buffer and feeds the paper n/60
inches.
• Sets the print starting position to the beginning of the line.
• The predetermined line spacing remains unchanged.
D e f a u l t • Not defined.
n
ESC K
Name
Print and reverse feed using minimum units
F o r m a t < 1 B >
R a n g e
Description
Prints the data in the print buffer and feeds the paper n/60
< n >
< 4 6 >
H H
When n = <* * * * * * *1>B, reverse eject is set.
When n = <* * * * * * *0>B, reverse eject is canceled.
(And the forward ejection is set.)
=
0
< n >
< 4 A >
H H
< 4 B > < n >
H H
- 2 9 -
FF.