Epson TM-290-II Operator's Manual page 37

D, depending on the value of n .
• Valid only in Page Mode.
n=0
D e f a u l t
ESC W n1 n2 . . .
Name Set printable area in Page Mode
F o r m a t < 1B >
n 2 = n 6 = 0
R a n g e
n4 = 0, 1
Description Sets the printable area in Page Mode.
• Sets the print starting position at the upper left (x0, y0),
the length in the y direction (paper feeding direction) to
dy dots, and the length in the x direction to dx dots.
x 0 = n1+n2x256 y0 = n3+n4x256
dx = n5+n6x256
Notes
• Settings exceeding the maximum printable area on the paper
are automatically set to the maximum settable area.
• The maximum printable position in the x direction is (209,y)
(0
• When printing in the specified area, the printable area
height and width should be 8 dots or more.
• The printable area should be specified within the paper
size.
• Valid only in Page Mode.
n1 = n2 = n3 = n4 = 0, dx = 210, dy = 480
Default
n8
< n1 >< n2 > . . . < n8 >
< 57 >
H H
Printable area
dx
dy Printable area
(x0+dx-1, y0+dy-1)
y y0+dy-1).
- 3 2 -
dy = n7+n8x256
on the paper