Epson TM-290-II Operator's Manual page 38

n
ESC c4
Name
Select paper detectors to stop printing
F o r m a t < 1B >
R a n g e
Description Selects the paper detectors used to stop printing.
• Each bit of n is used as follows:
Bit
Notes
• It is possible to select multiple detectors for print control to
stop printing. In this case, when only one detector detects
no paper, the printer stops printing.
• Printing is stopped after the current line is completed and
the paper is fed. At this time, if the panel switches are
disabled, the printer automatically makes the clamp open and
waits for another paper to be inserted.
D e f a u l t
R e f e r e n c e E S C c 5
n
ESC c 5
Name
Enable/disable panel switches
F o r m a t
< 1B >
Description
Enables or disables all the panel switches.
• Only the lowest bit of n is valid.
When n = <* * * * * * *0>B, panel switches are enabled.
When n = <* * * * * * *1>B, panel switches are disabled.
< 63 > < 34 >
H H
Function
0 Undefined
1 Undefined
2 Undefined
3
Undefined
4 TOF detector Invalid
5 BOF detector Invalid
6 Undefined
7 Undefined
n = 0 (Both the TOF and BOF detctors invalid.)
< 63 > < 35 >
H H
- 3 3 -
< n >
H
Value
0 1
- -
- -
- -
- -
Valid
Valid
- -
- -
< n >
H