Displays; Weight Display - Adam Equipment BCT Series Manual

[U 1-6] Fetch a stored PLU value directly
Used to add a decimal point when entering a number on the display
[PRINT/ Print the total weight, unit weight, quantity of percent
SAVE]
[SMPL] Used to input the number of items in a sample.
[UNIT W.T.] Used to enter the weight of a sample manually.
Tares the scale. Stores the current weight in memory as a tare value,
subtracts the tare value from the weight and shows the results. This is the
[Tare
net weight. Entering a value using the keypad will store that as the tare
]
value.
[0/ Zero] Sets the zero point for all subsequent weighing to show zero.
5.0

DISPLAYS

The scale includes one LED display separated into three. These are "Weight", "Unit
Weight" and "Count".
5.1

WEIGHT DISPLAY

: Stability indicator
0 : Zero indicator
Weight: The weight of goods.
Unit weight: The unit weight of goods.
Total Count: The total count of goods.
Tare: Used as tare key in pricing mode
Lo-bat: When battery power lower than 5.6V, it will show.
Kg / Lb / g / oz /: Symbols shown for the units
Net: Net weight‐ The scale has been tared
© Adam Equipment Company 2019