Specifications; Printer - KIP 600 Series User Manual

1. 4

Specifications

1. 4. 1

Printer

Subject
Model
Type
Printing method
Color
Photoconductor
Print Productivity
Exposure method
Resolution
Print width
Print length
Warm up time
Fusing method
Development
Drum charging
Transfer
Separation
Media feeding method
Rating power
Interface
Power consumption
Acoustic noise
Specification
KIP 600 Series
- KIP 650 : 2 rolls wide format color printer
- KIP 660 : 2 rolls wide format color MFP
Console, full color and monochrome print/scan
LED Array Electro Photography, Dry Toner
CMYK
Organic Photoconductive Drum
60mm/sec. (6.0 D/min, 3.1 E/min.) : Color and monochrome
(5.7 A1/min, 2.9 A0/min.) : Color and monochrome
Multi-Level (9 levels) LED Print Head
600dpi x 2400dpi
Maximum : 914mm (36 inches)
Minimum : 279.4mm (11 inches)
Maximum :
Plain Paper / Bond
Tracing Paper / Vellum
Film
Glossy Paper
Minimum : 210mm (8.5 inches)
NOTE : If the print is longer than the above, KIP does not
guarantee image quality or the reliability of the media feeding
system.
Less than 5 minutes
(At 23 degrees centigrade, 60% RH and 208V)
Heat roller fusing
Contact, mono component non-magnetic development system
Charging Roller (KIP CAC Technology)
Transfer roller
Electrostatic separation (AC)
Automatic - 2 rolls
208 to 240V (+6% to -10%), 14A and 50/60Hz
Ethernet 10BASE-T, 100 BASE –TX, 1000 BASE-T
USB 2.0/3.0 (5VDC max)
230V, 50/60Hz
Printing 1.4 kW (Average)
Warm up
Ready
Cold Sleep
Less than 65dB (Printing)
NOTE : Impact noise such as cutting sound is excluded.
Less than 60dB (Ready)
The highest sound pressure according to EN ISO 7779 is 70dB (A) or less.
5x standard portrait
1x standard portrait
1x standard portrait
1x standard portrait
3.3 kW (Average)
0.5 kW (Average)
3.2 W (Average)
1-5
6000mm in case of A0/36"
Chapter 1 Before Use