KIP 600 Series User Manual page 56

2. Pinch and gently pull and remove a jammed sheet toward you.
WARNING
(1) There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser
Unit, or you will be burnt.
Also the mis-fed media can be very hot. Be careful not to get burnt when you remove it.
(2) The stripping claws (2) with a sharp edge are on the inside face of the Fuser Cover. Take
care not to get scratched on them when removing a sheet.
3. Close the Fuser Cover (1).
2
2
3-7
2
1
Chapter 3 Error Correction