KIP 600 Series User Manual page 79

3. Clean 6 Exit Rollers (1) of the Paper Exit section to the arrow direction with the cloth which is
wrung out the water.
NOTE
1. Clean the Exit Rollers when they are cold; such as "before turning on the printer".
2. Carefully clean the Exit Rollers so as not to damage the Mylar (9) adhered to 4 Exit Rollers.
(There is no Mylar (9) on 2 Exit Rollers in the center.)
2. Carefully clean the Exit Rollers so as not to damage the Mylar (6) and the Discharging
Brush (7).
1
9
7
4-4
6
6
Chapter 4 Maintenance