KIP 600 Series User Manual page 66

3. Open the Fuser Cover (2), and carefully pull and remove the jammed sheet (5).
WARNING
(1) There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser
Unit, or you will be burnt.
Also the mis-fed media can be very hot. Be careful not to get burnt when you remove it.
(2) The stripping claws (6) with a sharp edge are on the inside face of the Fuser Cover. Take
care not to get scratched on them when removing a sheet.
4. Open the Left Side Door (7). Loosen 2 Knobs (8) to detach the Left Side Cover (3).
7
6
6
3-17
5
2
6
8 3
Chapter 3 Error Correction
8