Attaching The Rack-Mount Brackets - Cisco Catalyst 3650 Series Hardware Installation Manual

Installing the Switch
Figure 2-7
1
2
3

Attaching the Rack-Mount Brackets

To install the switch in a rack, use four No. 8 Phillips flat-head screws to attach the long side of the
brackets to the switch for the front-mounting or rear-mounting positions
to attach the brackets for the front-mounting position.
Catalyst 3650 Switch Hardware Installation Guide
2-10
Rack-Mounting Brackets
1
4
19-inch brackets (RACK-KIT-T1=)
Extension rails and brackets for four-point
mounting, includes 19-inch brackets.
(4PT-KIT-T1=)
ETSI brackets (RACK-KIT-T1=)
3
5
4 23-inch brackets (RACK-KIT-T1=)
5 24-inch brackets (RACK-KIT-T1=)
(Figure
Chapter 2 Switch Installation
2-8). Use four screws
OL-29734-01