Switch LEDs
RJ-45 Console Port LED
Table 28: RJ-45 Console Port LED
Color
Off
Green
Fan LED
Table 29: Fan LED Indicator
Color/State
Off
Green
Amber
Red
Uplink Port LEDs
The uplink ports have various status LEDs. Each port LED is labeled according to its module status.
• For SFP ports, a G labeling nomenclature is used, where G = 1 Gigabit. The The G label appears to the
• For SFP+ ports, a 10G labeling nomenclature is used, where 10G = 10 Gigabit. The 10G label appears
• For SFP28 ports, a 25G labeling nomenclature is used, where 25G = 25 Gigabit. The The G label appears
• For QSFP+ ports, a 40G labeling nomenclature is used, where 40G = 40 Gigabit. The The G label appears
Description
The fan is not receiving power; the fans have stopped.
All fans are operating normally.
One or more fans have encountered tachometer faults.
One or more fans' tachometer faults have exceeded the maximum limit.
left of the uplink port LED.
to the left of the uplink port LED. SFP+ module ports support both SFP+ and SFP modules
to the left of the uplink port LED.
to the left of the uplink port LED.
RJ-45 Console Port Status
RJ-45 console is disabled. USB console is active.
RJ-45 console is enabled. USB console is disabled.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
RJ-45 Console Port LED
85