IBM TS7650 Installation Roadmap Manual page 114

2. At the command line, log in with the ID root and the password admin.
3. Enable RAS on the server:
88
IBM System Storage TS7650 ProtecTIER Deduplication Appliance: Installation Roadmap Guide
b. Attach a graphics-capable monitor to the video port on the back of the
server.
Note: If you are unable to connect to the server by using the procedure in step
1 on page 87, see Appendix C, "Making a server connection through the IMM,"
on page 151 for instructions on connecting to the server by using the IMM in
the server and your service notebook or the TSSC.
Note: During the boot cycle, the ProtecTIER file systems are mounted. If the
message: Running... displays, press Enter to proceed to the login prompt.
a. At the command line, type menu and press Enter. The ProtecTIER Service
menu displays.
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasap1
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
E) Exit
----------------------------------------------------------------------
>>> Your choice?
b. Type the numeral corresponding to ProtecTIER Configuration and press
Enter. The ProtecTIER Configuration menu displays.
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasap1
ProtecTIER Configuration (...)
----------------------------------------------------------------------
1) Configure ProtecTIER node
2) Recover Configuration for a replaced server
3) Configure RAS
4) Update Time, Date, Timezone & Timeserver(s)
5) Configure replication (...)
6) IP Network configuration (...)
7) Update Firmware
8) Update the System's name
9) Validate configuration
B) Back
E) Exit
----------------------------------------------------------------------
>>> Your choice?
c. Type the numeral corresponding to Configure RAS and press Enter.
d. Follow the on-screen instructions to complete the configuration process.
Important:
v If you receive an error that the frame range number entered is already in
use, specify a different range in an increment of 10. For example, if frame
range 20 is already in use, try frame range 30.
v For clustered configurations, use the same frame (location) number for
both nodes when clustered together in the same frame.