Table of Contents
Advertisement
Primary input
DP 1.1
HDMI 2.0–1
HDMI 2.0–2
DVI
SDI
Both primary and secondary input are limited to FHD resolution max.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
To select Picture and Picture input
1.
Bring up the OSD main menu.
2.
Navigate to the Input Select menu.
3.
Enter the PaP Input submenu.
4.
Select one of the available PaP sources (or NONE) and confirm.
4.3.8 Picture in Picture input
About Picture in Picture input
This function allows the display to show a second input source as an inset window inside the main source.
The possible Picture in Picture combinations between the Primary input (main source) and the Secondary
input (PiP image) is displayed in the following table.
Primary input
DP 1.2 MST / 1.1 / Dual
HDMI 2.0–1
HDMI 2.0–2
Quad-SDI
12G-SDI
Gamma and Color temperature for the PiP Source are always set to Native and 6500 K
independently from the Transfer Function applied to the Primary input Source.
To select Picture in Picture input
1.
Bring up the OSD main menu.
2.
Navigate to the Input Select menu.
3.
Enter the PiP Input submenu.
4.
Select one of the available PiP inputs (or NONE) and confirm.
Secondary input
•
HDMI 2.0–1
•
HDMI 2.0–2
•
DVI
•
SDI
•
DP 1.1
•
DVI
•
SDI
•
DP 1.1
•
HDMI 2.0–1
•
HDMI 2.0–2
Secondary input
•
DVI
•
SDI
R5910599 /00
Advanced operation
MDSC-8427
31
Advertisement
Table of Contents
