Table of Contents
Advertisement
Important information
•
If the equipment does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
•
If the equipment has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
•
All devices and complete setup must be tested and validated before taking into operation.
•
At end user application level it is necessary to foresee a backup unit in case the monitor fails.
Technical data
•
The monitor is intended for indoor use
•
The monitor has been designed to be used in landscape position with a tilt of -10° (backward) and +10°
(forward)
•
Class I Equipment, according to the type of protection against electric shock
•
The monitor is not intended to be sterilized
•
The monitor has no applied parts. The front side of the monitor and the plastic enclosure have been treated
as applied parts however, because they may accidentally be touched by the patient for a time <1 minute.
•
The compliance of this display with Medical Safety and EMC requirements has been evaluated using the
external (optional) medical power supply model 'ATM200T-P250'. If a different power supply will be used,
further investigation for Safety and EMC requirements have to be performed at system level.
•
The enclosure has to be checked upon collision damage, refer to qualified service personnel
National Scandinavian Deviations for CL. 1.7.2
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
5.2 Environmental information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste
from electrical and electronic equipment, this product must not be disposed of with other municipal waste.
Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or your municipal
waste disposal service.
For details, please visit the Barco website at:
Turkey RoHS compliance
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
[Republic of Turkey: In conformity with the WEEE Regulation]
40
R5910599 /00
MDSC-8427
http://www.barco.com/AboutBarco/weee
Advertisement
Table of Contents
