Maintenance And Inspections - Canon imagePRESS C1+ User Manual

Maintenance and Inspections

•
When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord .
Failure to observe these steps may result in a fire or electrical shock .
•
Disconnect the power cord from the power outlet regularly, and clean the area around the base of
the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is
removed . If the power cord is connected for a long period of time in a damp, dusty, or smoky location,
dust can build up around the power plug and become damp . This may cause a short circuit and result
in a fire .
•
Clean the machine using a slightly dampened cloth with a mild detergent mixed with water . Do not
use alcohol, benzene, paint thinner, or other flammable substances . Check detergent for flammability
prior to use . If flammable substances come into contact with a high-voltage area inside the machine, it
may result in a fire or electrical shock .
•
There are some areas inside the machine which are subject to high-voltages . When removing jammed
paper or when inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal
objects to touch the inside of the machine, as this may result in burns or electrical shock .
•
Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or a fire .
•
The fixing unit and its surroundings inside the machine may become hot during use . When removing
jammed paper or when inspecting the inside of the machine, do not touch the fixing unit and its
surroundings, as doing so may result in burns or electrical shock .
xxi