Canon imagePRESS C1+ User Manual page 99

# 861
Cause An error occurred while processing PDL data or image data.
Remedy Confirm the print settings you made when printing from a computer.
# 862
Cause 1 The saddle finisher trays have exceeded their stacking limits. (See Chapter 9, "Appendix, " in the
Reference Guide .)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings which is not supported was set.
Remedy Change the print data or print settings, and try printing again.
Cause 3 Image data or data which is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
# 863
Cause An error occurred while processing PDL data or image data.
Remedy Check the settings, and try printing again.
# 864
Cause 1 The external controller or controller board is not attached, or is not functioning properly.
Remedy Contact your System Manager.
Cause 2 The external controller or controller board cannot be recognized correctly.
Remedy Contact your System Manager.
# 865
Cause 1 The functions related to job execution are restricted.
Remedy Contact your System Manager.
Cause 2 When trying to send a PDL data containing clear data, the job was canceled.
Remedy Contact your local authorized Canon dealer.
# 887
Cause Device information could not be delivered because the paper database information is not
supported by the client machine.
Remedy Contact your local authorized Canon dealer.
3-15
List of Error Messages
3