Canon imagePRESS C1+ User Manual page 57

● If login authentication by a login service (SSO-H or SSO) is set:
☐ The Start Up screen is displayed until the machine is ready to scan.
☐
After the Start Up screen disappears, the MEAP Start Up screen is displayed regardless of the
Initial Function settings.
•
If you turn OFF the main power, wait at least 10 seconds before turning the main power back ON. For
instructions on restarting (turning the main power OFF, and then back ON) the machine, see "Main Power, "
on p. 1-21.
•
Do not turn the main power OFF, if the optional Color Universal Send Kit is activated. Sending or receiving
I-fax documents cannot be done when the main power is turned OFF.
•
If SSO-H or SSO is set as the login service, the machine will take longer to become ready to scan.
5
If you are using a login service, log in using the procedure for the login
service you are using .
•
If you are using the optional Card Reader-C1 for Department ID Management, see Chapter 3, "Optional
Equipment, " in the Reference Guide.
•
If you are using Department ID Management, see Chapter 2, "Basic Operations, " in the Reference Guide.
•
For instructions on logging in using a login service, see Chapter 2, "Basic Operations, " in the Reference
Guide.
1
1-25
Main Power