Canon imagePRESS C1+ User Manual page 89

1
Inspect all paper jam locations indicated on the touch panel display, and
remove any jammed paper .
See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can
follow the instructions on the touch panel display.
If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside the
machine.
•
If the machine's power is turned OFF when there is a paper jam, detection of paper jams in the paper
drawers is not possible after the power is turned back ON. Clear paper jams without turning the power OFF.
•
If a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the directions on
the touch panel display to clear the paper jam. (See "Feeder (DADF-R1) (Optional), " in the Reference Guide.)
•
If the MEAP screen is displayed, a message appears in the Job/Print monitor area. Press [System Monitor] →
follow the procedures that appear on the touch panel display to help you remove the jammed paper.
•
Some areas that are shown to have paper jams may not actually have paper jams. However, always check
all locations indicated on the touch panel display in the order that is given.
•
The following image, which is displayed in the upper right corner of the screen, indicates the possible
locations where paper jams may occur. The page number describing how to remove the jammed paper is
also shown below.
①
Decurler Unit (See "Decurler Unit," in the Reference Guide .)
②
Stack Bypass (See "Stack Bypass," in the Reference Guide .)
③
Right Cover Unit (See "Inside the Upper/Lower Right Cover Unit," in the Reference Guide .)
④
Fixing Transport Unit (See "Fixing Transport Unit (Inside the Main Unit)," in the Reference
Guide .)
⑤
Paper Drawers (See "Paper Drawers," in the Reference Guide .)
3-5
Clearing Paper Jams
3