Laser Safety; Additional Information - Canon imagePRESS C1+ User Manual

Laser Safety

This Product is certified as a Class I laser product under IEC60825-1:1993 and EN60825-1:1994. This
means that the product does not produce hazardous laser radiation.
Since radiation emitted inside the product is completely confined within protective housings and
external covers, the laser beam cannot escape from the machine during any phase of user operation.
Do not remove protective housings or external covers, except as directed by the equipment's
Reference Guide.

Additional Information

When servicing or adjusting the optical system of the product, be careful not to place screwdrivers or
other shiny objects in the path of the laser beam. Also, accessories such as watches and rings should
be removed before working on the product. The reflected beam, even though visible or invisible, can
permanently damage your eyes.
The label shown below is attached to the main unit, inside the front cover and the transport unit.
This Product has been classified under IEC60825-1:1993 and EN60825-1:1994, which conform to the
following classes;
CLASS I LASER PRODUCT
LASER KLASSE I
APPAREIL A RAYONNEMENT LASER DE CLASSE I
APPARECCHIO LASER DI CLASSE I
PRODUCTO LASER DE CLASE I
APARELHO A LASER DE CLASSE I
Use of controls, adjustments, or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure .
ix