①
Feeder (DADF-R1)
Originals placed in the feeder are automatically fed sheet
by sheet to the platen glass for scanning. The feeder also
automatically turns over two-sided originals to make one- or
two- sided copies. If you selected the Color Image Reader-H1
when purchasing the machine, it comes with a platen cover
instead of a feeder.
②
Paper Deck-AA1
The Paper Deck-AA1 provides an additional source of paper
for printing jobs.
The Paper Deck-AA1 holds up to 3,500 sheets of paper 80
g/m
.
2
③
Punch Unit-L1/N1/P1
The Punch Unit-L1/N1/P1 is equipped with the Hole Punch
feature.
④
Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached to the optional
Saddle Finisher-AA2 for saddle stitching.
⑤
Staple Cartridge-J1
The Staple Cartridge-J1 can be attached to the optional
finisher for stapling (Corner and Double).
⑥
Saddle Finisher-AA2
The Saddle Finisher-AA2 is equipped with the following
features: Collate, Group, Offset, and Staple (Corner, Double,
and Saddle Stitch).
⑦
Finisher-AA1
The Finisher-AA1 is equipped with the following features:
Collate, Group, Offset, and Staple (Corner and Double).
⑧
Platen Cover Type K
The Platen Cover Type-K holds down originals on the platen
glass of the Color Image Reader-H1.
⑨
Card Reader-C1
The Card Reader-C1 enables Department ID Management to
be performed by using the control card.
⑩
Document Tray-J1
⑪
Stack Bypass Alignment Tray-B1
The Stack Bypass Alignment Tray-B1 corrects the bias of the
paper loaded into the stack bypass.
⑫
Color Image Reader-H1
The Color Image Reader-H1 is necessary to use the Copy and
Scan functions.
System Configuration
1
1-15